Adjust glasses yourself

Check three parts of your glasses to wear comfortably.

 

1.Temple Bend

2.Nose-Pad

3.Width between Temples

Figure 1 Bend temple at top fo the base of the ear.
Figure 1 Bend temple at top fo the base of the ear.

1.Temple Bend

 

Bend temple at top of the base of the ear(Figure1).

Please look Figure 1,you can see Temple Bend is at the base of the ear.

 

If you adjust your glasses like this,they will fit your face and not sliding down.

 

Figure 2 Bend temple before the bese of the ear.
Figure 2 Bend temple before the bese of the ear.

×

Failure 1:Do not bend temple before the bese of the ear(Figure2).

If you bend temples like this,your glasses sliding down off your face.

×

Failure 2:Do not bend temple beyond the bese of the ear(Figure3).

If you  bend temple beyond the bese of the ear,your glasses have come loose. Please adjust proper position.

Figure 3.1 Bend temple beyond the bese of the ear.
Figure 3.1 Bend temple beyond the bese of the ear.
Figure 3.2 You can see the bend of temple is not proper psition.
Figure 3.2 You can see the bend of temple is not proper psition.

How to bend temples.

You required two steps to adjust temples.

  1.  Bend temple downwards an angle of 45degrees.
  2.  Bend temple inwards an angle of 30 degrees.
Figure 4.1 Bend temple downward an angle of 45degrees.
Figure 4.1 Bend temple downward an angle of 45degrees.
Figure 4.2 Bend temple inward an angle of 30 degrees.
Figure 4.2 Bend temple inward an angle of 30 degrees.

Figure 5.1 Nose-pads are crushed.
Figure 5.1 Nose-pads are crushed.

2.Nose-Pad

In daily use,nose-pad of your glasses getting crushed.This makes a cause of slidding down of glasses.Set up nose-pad by your hands.If it difficult,you can use pliers.

 


 

Figure 5.2 Bend nose-pads inside.
Figure 5.2 Bend nose-pads inside.
Figure 5.3 If it hard,you can use pliers in your garage.
Figure 5.3 If it hard,you can use pliers in your garage.

Figure 5.4 Width beteen nose-pads is 2cm(0.8inch).
Figure 5.4 Width beteen nose-pads is 2cm(0.8inch).
Figure 5.5 Don't put up nose-pads.It'll be buried in the ridge of the your nose.
Figure 5.5 Don't put up nose-pads.It'll be buried in the ridge of the your nose.

3.Width between Temples

Width between temples gonna be 14cm(5.5inches).It's an average width of human face. Bend the root of temples please.If it hard,use pliers in your tresure box.

Figure 6.1 Bend the root of temples inside.
Figure 6.1 Bend the root of temples inside.
Figure 6.2 Width beteen temples is 14cm(5.5inches).
Figure 6.2 Width beteen temples is 14cm(5.5inches).

一級眼鏡士のメガネ屋さん

(有)ナガタメガネ

℡ 096-282-6100

ナガタメガネ店舗写真
熊本県にある一級眼鏡士の店ナガタメガネ

熊本県上益城郡御船町

御船1046-2

 TEL 096-282-6100

 10:00~19:00

お問い合わせ✉